Samsung SCH-I600MSAXAR - Manual (Page 102)

94
Digit dialing
Digit Dial allows you to dial any phone number by simply
speaking the digits into the Smartphone. No training is
necessary, and Digit Dial is programmed to understand
natural speech.
1. Press and hold for two seconds.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Please say a
command” plays through the speakerphone.
3. Say “Digit Dial” at a distance of 3-12 inches from the
Smartphone in a natural voice.
4. “Please say the number” plays through
the speakerphone.
5. Say the area code and number that you wish to dial into
the microphone. Say the number naturally.
6. The number that you said is repeated through the
speakerphone and your Smartphone dials the number.
7. If Voice Signal is not sure of the number that you said, a
list of possible matches appears in the display.
8. You’re asked to confirm the correct number as Voice
Signal displays the results. Say “Yes” or “No” to confirm
or reject the number when prompted.
Name dialing
To use Name Dial, you’ll need to have some entries in your
Contacts list. See “Contacts” on page 46 for information on
creating a Contacts list.
1. Press and hold for two seconds.
Verizon i600 04-05-04.book Page 94 Thursday, June 24, 2004 5:22 PM