Samsung TT17JSBLSV-XBM - Manual (Page 17)

English 15
Troubleshooting
Before calling for service, check the information in this section to see if you can solve the
problem yourself. If you do need assistance, please call the phone number on the warranty
card, the phone number on the back cover of this manual, or contact your dealer.
There is no screen image
n Check to see that both the monitor and the computer are plugged in and turned on.
“No Connection, Check Signal Cable” appears
n Check the signal cable connection between the computer and the monitor.
“Sync. Out of Range” appears
n The input signal frequency is over or under the synchronization range of the monitor, see
“Specifications” on page 17.
The screen image is too light or too dark
n Adjust the brightness or contrast settings, see page 11.
The screen image is too large or too small
n Adjust the size settings, see H-size and V-Size on page 11.
n Adjust the Zoom setting, see page 13.
The colors are distorted with dark or shadowed areas
n Activate the degauss feature, see page 14.
n Adjust the color temperature, see page 13.
The power indicator light is blinking green
n The monitor is using its power management system, see “PowerSaver” on page 16.
You need the monitor driver software
n Download the driver from the internet at
http://www.samsung-monitor.com
http://www.samsungmonitor.com(USA only)
755DFG(E)10p.fm Page 15 Friday, December 22, 2000 9:38 AM