Samsung SC-W71-XAA - Manual (Page 22)

ENGLISH
Preparing
To use the Battery Pack
How long will the battery last for recording?
✤ Depends on how often zoom lens is used in recording. Prepare as many battery packs as possible.
Recharging the Battery Pack
1. Attach the battery pack to the camcorder.
2. Connect the AC Power Adapter to the AC cord and
connect the AC cord to a wall socket.
3. Connect the DC cable to the DC jack of the camcorder.
4. Turn off the camcorder power, and the recharging indicator
will start blinking and begin recharging.
-
Blinking once a second : Indicates less than 50%
has been charged.
- Blinking twice a second : Indicates 50% ~ 75%
has been recharged.
- Blinking three times a second : Indicates 75% ~ 100%
has been recharged.
- Blinking stops and stays on : Recharging has been completed.
- On for a second and off for a second : Indicates there is an error.
Reset the battery pack and DC cable.
5. If recharging is completed, separate the camcorder, AC power adapter, and battery pack.
- Even if the power is turned off, battery will be discharged.
Note: Battery pack may be charged a little at the time of purchase.
1
4
2 3
OFF
22