Samsung EC-WB200FBPWUS - Manual (Page 127)

Using AllShare Play to send files
Wireless network 126
Viewing photos or videos on devices that support AllShare Play
1
Rotate the mode dial to .
2
Select → Nearby Devices.
• If the guide message appears, select OK.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 110)
• You can set to allow only selected devices or all devices to connect by
pressing [ ], and then selecting DLNA Access Control on the screen.
• A sharing file list is created. Wait until other devices can find your camera.
3
Connect the AllShare Play device to a network, and then turn on
the AllShare Play feature.
• Refer to your device's user manual for more information.
4
On the camera, allow the AllShare Play device to connect to your
camera.
5 On the AllShare Play device, select a camera to connect.
6 On the AllShare Play device, browse the shared photos or videos.
• For information about searching for the camera and browsing the photos
or videos on the AllShare Play device, refer to the device's user manual.
• Videos may not play smoothly depending on the type of AllShare Play
device or the network condition. If this happens, re-record the video
in 640 X 480 or smaller quality and play it again. If videos do not play
smoothly on your device over the wireless connection, try connecting the
camera to the device with an A/V cable.
AP
▲ A camera is connected to a TV that supports AllShare Play via WLAN.