Connecting to a wlan – Samsung EC-WB200FBPWUS User Manual
Page 111
Wireless network
110
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Icon
Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [ ] or touch to open AP setting options
• When you select a secured AP, a pop-up window appears. Enter the
required passwords to connect to the WLAN. For information about
entering text, refer to "Entering text". (p. 113)
• When a login page appears, refer to "Using the login browser". (p. 111)
• When you select an unsecured AP, the camera will connect to the WLAN.
• If you select a WPS profile supported AP, select
→ WPS PIN connection,
and then enter a PIN on the AP device. You can also connect to a WPS
profile supported AP by selecting
→ WPS button connection on the
camera, and then pushing the WPS button on the AP device.
Connecting to a WLAN
1
Rotate the mode dial to
.
2
Select
,
,
, or
.
3
Press [
], and then select Wi-Fi Setting.
• In some modes, follow the on-screen instructions until the Wi-Fi Setting
screen appears.
• The camera automatically searches for available AP devices.
4
Select an AP.
Refresh
Back
• Select Refresh to refresh connectable APs.
• Select Add wireless network to add an AP manually. Your AP name must
be in English to add the AP manually.