Samsung HT-P1200T-XAC - Manual (Page 8)

ENG
13
Installing the DVD player
The player can be installed on a stand or on the wall.
Installation Procedure 1 - To install as stand mount
2
1
Combine the round board
and the stand with the
screws (4).
Insert two screws in the top
holes, but only screw them in
1/2 way.
3 Align the stand with the two
screws.
4 Fully tighten the screws to
secure the stand to the DVD
player.
5 Insert the remaining four
screws & tighten.
Round Board
Stand
Installation Procedure 2 - To install as wall mount
14
CONNECTIONS
• Keep the main unit and speakers out of the reach of children as the
equipment could tip over. Caution
2
1 Remove the 3 screws from
the Stand.
Remove the Stand Holder
from the Stand.
3 Fix the removed Holder on
DVD player using the 6
supplied screws.
4
Fix the supplied Bracket on a
desired location on the wall.
5 Hang the DVD player on the
Bracket.