Samsung HT-P1200T-XAC - Manual (Page 39)

ENG
75 76
Listening to Radio Presetting Stations
2 1
Tune in to the
desired station. Press TUNER
button.
Automatic Tuning 2
Manual Tuning
2 1 Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the Function
button to select the
desired band (FM).
Press the STOP ( ) button
to select "MANUAL" and
then press and hold button to
automatically search the band.
Automatic Tuning 2
Press STOP ( ) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
Manual Tuning
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/ST button to listen in Mono/Stereo. To tune in to a preset station, press on the
remote control to select a channel.
• Refer to Step 2 on page 75 to
automatically or manually tune in
to a station.
2 1
• “PRGM” flashes in the
display. Tune in to a station.
3
Example: Presetting FM 89.1 in the memory
Press TUNING/CH
to select "89.10".
Press the TUNER
button and select
the FM band.
• Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
5 4
• You can select between 1 and
15.
Press the TUNER
MEMORY button.
Press the TUNER
MEMORY button
again.
6 To preset another
station, repeat
steps 2 to 5. Press
to select preset
number.
When is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH
button to automatically search for
active broadcasting stations.
Briefly press TUNING/CH button
to increase or decrease the
frequency incrementally.
Automatic Tuning 1
Remote Control Unit
Main Unit
RADIO OPERA
TION
You can store up to: 15 FM stations