APC RAID Subsystem SCSI-SATA II - Manual (Page 95)

- 95 -
Figure E.5
ž Done, please check the settings.
Figure E.6
ž Check iSCSI settings. The IP address of iSCSI data port 1 is
192.168.11.229. Using port 1 as Trunking or LACP. Click the blue
square in “Aggregation” field to set Trunking or LACP.
Figure E.7
ž Select “Trunking”. If LACP is needed, please see Figure E.12.
Figure E.8