APC RAID Subsystem SCSI-SATA II User Manual
Page 65

- 65 -
was also imported, the user’s current data will be cleared. Below is table of
available configuration in import & export function.
System name
Controller system name
IP address
Web UI IP address with (1) DHCP enabled, (2) IP, (3)
Subnet mask, (4) Gateway, (5) DNS
iSCSI
iSCSI data port address with (1) Aggregation, (2) iSNS,
(3) CHAP, (4) LAN 1 IP, Aggregation, IP, Subnet mask,
Gateway, MTU
Login config
Admin account login config with (1) Auto logout setting,
(2) Admin login lock
Password
Admin password value with (1) Current password, (2)
Old password
Date
Time Zone setting
Event log mail setting with (1) Mail_from address, (2)
SMTP server, (3) Authentication, (4) Mail account ID,
(5) Mail password, (6) Mail_To_1 address, (7)
Mail_To_2 address, (8) Mailt_To_3 address, (9) Event
log filter setting
SNMP
SNMP setting with (1) SNMP trap address 1, (2) SNMP
trap address 2, (3) SNMP trap address 3, (4)
Community setting, (5) Event log filter function
Event log
Event log filter setting with (1) Web UI and console UI
setting, (2) LCM setting, (3) Web UI pop up event
setting
SES config
SES management setting
vol_temp
Auto shutdown setting
UPS
UPS setting with (1) UPS type, (2) Shutdown Battery
Level, (3) Shutdown Delay, (4) Shutdown UPS
Physical disk
Not available in import function.
Current controller hard disk status with (1) size, (2)
block size, (3) VG, (4) hard status