Samsung LNS5797DX-XAA - Manual (Page 71)

English-69
Using the V-Chip
Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user).
The on-screen menu will instruct you to assign a password (you can change it later, if necessary).
1 Press the MENU button.
Press the
or button to select “Setup”,
then press the ENTER button.
Press the or button to select “V-Chip”,
then press the ENTER button.
2 Press the button.
Press the number buttons to enter your current
4-digit PIN.
(The default PIN for a new TV set is “0000”.)
The “V-Chip” menu is displayed.
3 Press the or button to select “Change PIN”,
then press the ENTER button.
4 Press the button.
Press the number buttons to enter your new
4-digit PIN.
Re-enter your new PIN to confirm.
The message will automatically disappear,
and return to the previous menu after a few
seconds, even if the ENTER
button is not
pressed.
Select “Return” by pressing the or button,
then press the ENTER button to return to the
previous menu. Press the EXIT button to exit.
The PIP doesn’t function when
the V-Chip is active.
If you forget the pin number,
press the remote control buttons
in the following sequence, which
resets the pin to 0-0-0-0: POWER
(Off), MUTE, 8, 2, 4, POWER (On).
The V-Chip function only works in
TV, AV mode and S-Video mode.
How to Change Your Password
BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 69