Samsung LNS5797DX-XAA - Manual (Page 22)

English-20
Before your television can begin memorizing the available channels, you must specify
the type of signal source that is connected to the TV (i.e., an antenna or cable system).
Memorizing Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels.
After the available channels are memorized, use the CH
and CH buttons to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic).
Selecting the Video Signal Source
1 Press the MENU button.
Press the
or button to select
“Channel”, then press the ENTER button.
2
Press the or button to select “Antenna”,
then press the ENTER button.
Press the or button to select “Air” or
“Cable”, then press the ENTER button.
3 Press the or button to select “Auto
Program”, then press the ENTER button.
continued...
BN68-01047G-00Eng.qxd 4/26/06 5:37 AM Page 20