Samsung LNS5797DX-XAA - Manual (Page 17)

English-15
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
1 Press the POWER button on the
remote control.
The message “Menu language,
Channels and Time will be set.” is
displayed.
Press the ENTER
button, then
“Select the language of the OSD” menu
is automatically displayed.
2 Press the ENTER button to enter
the language. Press the or
button to select language, then the
ENTER
button.
“Select the antennas to memorize”
menu is automatically displayed.
3 Press the or button to
memorize the channels of the
selected connection.
Press the ENTER
button to
select “Start”.
Operation
If the antenna is connected to ANT 1(AIR), select “Air” and if it is connected to
ANT 2 (CABLE), select “Cable”.
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”.
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the
or button, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in
your particular area.
4 The TV will begin memorizing all
of the available channels. After all
the available channels are stored,
the Auto program menu reappears.
Press the
ENTER button when
channel memorization is plete.
To stop the search before it has
finished, press the ENTER
button
with stop selected.
continued...
BN68-01047G-00Eng.qxd 4/26/06 5:36 AM Page 15