Samsung RF263AERS-XAA - Manual (Page 16)

16_Setting Up
ADJUSTING THE FREEZER DRAWER LEVEL
1. Locate the height-adjuster ( 1 ) in the freezer drawer.
Unscrew the four Phillips screws ( 2 ) slightly to loosen the door.
2. Loosen the controller screw(
3 ) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
After adjustment, first tighten screw ( 3 ) and then screw ( 2 ).
Freezer Drawer
Adjustment part
1 2
3
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the Height Adjuster to +2.0 to reduce the door
slope.
Slope
Reference
plane
Setting up your French Door Refrigerator