Samsung RF263AERS-XAA - Manual (Page 13)

7
8
6
4. With the drawer pulled out fully, insert the lower basket ( 6 ) into
the rail system.
5. Hook the ends of the tilting pocket ( 7 ) into both brackets ( 8 ),
and push down until they lock into place.
1. Pull out the rails to the full length on each side of the cabinet evenly.
ASSEMBLE THE FREEZER DRAWER
2. Hang the freezer door front onto open slots on the sides.
3. Tighten four 10mm hex-head screws completely.
Slot
Slot
CAUTION
Make sure the door is well assembled on the rail
CAUTION
If the drawer is not properly assembled on the rail, the door
will not close and it will cause frost.
Setting Up_13
0
1
SETTING UP