Setting up your french door refrigerator, Removing the refrigerator, How to assemble the handles (cont’d) – Samsung RF263AERS-XAA User Manual
Page 10: Disassemble the refrigerator doors, Tools you will need
10_Setting Up
Freezer / Flex zone door handle assembly
Please do not remove the Freezer / Flex Zone drawer. Handle can be attached without removing the door.
CAUTION
HOW TO ASSEMBLE THE HANDLES (CONT’D)
REMOVING THE REFRIGERATOR
If your entrance won’t allow the Refrigerator to pass easily
through it, you can remove the doors.
Disassemble the Refrigerator doors
1. With the door closed, remove the top table(
1
)
using a Philips screwdriver, and then disconnect the
wires(
2
). Remove hinge screws(
3
) and ground
screw(
4
)
2
1
3
4
2. Lift the door straight up to remove.
3. With a Philips head screwdriver, remove the two
screws(
10
) attached to the lower left and right
door hinges.
With an Allen Wrench(3/16”), remove the two hex
head bolts(
11
) attached to the lower left and right
door hinges.
Remove the lower left and right door hinges(
12
).
Tools you will need
10
12
11
Philips screwdriver
10mm Socket Wrench
Allen wrench(3/16”)
Flat-blade screwdriver
Pliers
Setting up your French Door Refrigerator
OK
OK
* Tilt up the Handle bar and turn the wrench.
By using L-wrench, Fix the screw with the Longer part of it and
then fully tighten up with the Shorter part.
To best conceal the connection
points : Assemble the handles
with the mounting screws facing
down.
Put the handle on the fixer