Samsung EC-PR815BBA-US - Manual (Page 121)

ŝ121Ş
ƈ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
ƃ How to set the video out type
1. Press the Menu button and select the [ ] menu tab.
2. Press the Right button and select the [Video Out] menu
by pressing the Up/ Down button.
3. Press the Right button and select a desired LCD
by pressing the Up/ Down button.
- [Video Out] sub menu : NTSC, PAL
4. Press the OK button to set the setting.
ƃ NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
ƃ PAL
: Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
ƃ When using a TV as an external monitor, you will need to select the external or AV
channel of the TV.
ƃ There will be a digital noise on the external monitor, but it is not a malfunction.
ƃ If the image is not in the centre of the screen, use the TV controls to centre it.
ƃ When the camera is connected to an external monitor, the menu will be visible on the
external monitor and the menu functions are the same as those indicated on the LCD.
INFORMATION
ƃ Connecting to an external monitor
In RECORDING/ PLAY mode, you can
view the stored still images or movie clips
by connecting the camera to an external
monitor via the AV cable. When the
camera is connected to an external
monitor, the LCD monitor will be turned
off automatically.
Yellow Colour-Video
White Colour-Voice (Stereo)
Imprint
Sound
Brightness
Video Out
Quick View
Auto Rotating
USB
NTSC
PAL
Selecting Video out type