Samsung EC-AQ100ZBPBUS - Manual (Page 17)

16
Instructions on how to use the memory card
å The data on the memory card can be corrupted if:
- The memory card is used incorrectly.
- The power is switched off or the memory card is removed while
recording, deleting (formatting) or reading.
å Samsung cannot be held responsible for lost data.
å It is advisable to copy important data onto other media as back-up
e.g. fl oppy disks, hard disks, CD etc.
å If there is insuffi cient memory available :
A [Memory Full] message will appear and the camera will not
operate. To optimize the amount of memory in the camera,
replace the memory card or delete unnecessary images stored
on the memory card.
å Be sure to format the memory card (see p.58) if you are using
a newly purchased memory card for the fi rst time, if it contains
data that the camera cannot recognize, or if it contains images
captured with a different camera.
å Turn off the camera power whenever the memory card is being
inserted or removed.
å Repeated use of the memory card will eventually reduce the
memory card’s performance. Should this be the case, you will
need to purchase a new memory card. Wear and tear on the
memory card is not covered by the Samsung warranty.
å The memory card is an electronic precision device. Do not bend,
drop or subject the memory card to any heavy impact.
å Do not store the memory card in an environment with strong
electronic or magnetic fi elds, e.g. near loud speakers or TV
receivers.
å Please do not use or store in an environment where there are
extremes in temperature.
å Do not allow the memory card to become dirty or to come into
contact with any liquid. Should this happen, clean the memory
card with a soft cloth.
å Please keep the memory card in its case when not in use.
å During and after periods of extended use, you may notice that the
memory card is warm. This is perfectly normal.
å Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card
using this camera.
å Do not use a memory card formatted by another digital camera or
memory card reader.
å Don't remove the memory card when the camera status lamp is
blinking as this may cause damage to data in the memory card.