Samsung NP-X22-K01-SEA - Manual (Page 160)

159
Q
How do I receive a fax while the system is in
power saving mode (Rest mode)?
A To receive a fax in Standby mode, you have to set it
up as follows.
 The automatic fax reception function of the
fax program needs to be activated. (For more
information, see the corresponding fax program
manual.)
 Click Start > Control Panel > Network and
Internet Connections.
 Under See Also, click Phone and Modem
Options.
 In the Power Management tab of the Modem
Properties window, select the “With this device,
exit the computer from stand-by mode” item and
then click OK.
The above setting enables the modem to turn on
the system and receive a fax when in power saving
mode.
Q
function
A1 is a function that activates the
system in rest mode when a signal (such as ping
or magic packet commands) arrives from network
(wired LAN).
To use function:
 Select My Network Places > View network
connections from the Desktop.
 Click the right button on the touchpad over
Local Area Connection, and select Properties.
 Click Configure, and select Power
Management tab. Select “Allow this device to
bring the computer out of standby”, then click
OK. Restart the system.
– When turning the computer off when the network is
connected without selecting the
function, the LAN LED may not be turned off.
– The function is only available
when the LAN is turned on.
– When connecting a wired LAN while using a
wireless LAN, the function may
not work. To use the function,
select “Do not use Wireless LAN.”
– Connecting wired LAN while using wireless LAN
may not execute function.
Configure wireless LAN to “Disable” to use
On LAN> function.
Wired LAN Related