Samsung SC-L907-XAP - Manual (Page 65)

ENGLISH
61
USB interface (SCL907 only)
Connecting to a PC
1. Connect a USB cable to the USB port on the PC.
2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack)
3. Connect the audio cable to the Line input jack of the PC.
If the PC has no Line input jack, connect the audio cable to the MIC input jack.
This connection, however, may produce noise depending on the PC.
Notes:
■ If you disconnect the USB cable from the PC or the
camcorder while transferring, the data transmission will stop and the data may be damaged.
■ If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the
camcorder may not work properly.
-
If this occurs, remove the other USB devices from the PC and reconnect the camcorder.
MIC
USB Cable
USB AUDIO Cable
00732M SCL901 SEA (46-71) 12/26/03 10:46 AM Page 61