Samsung WB09H7300GP-A1 - Manual (Page 3)

ALIGNMENT AND ADJUSTMENTS
English - 3
TEST MODE
Test Mode:
Each Test Mode for the WB7000H(UBS2) is as
follows in the coming pages. The test modes
indicated by the red arrows are modes unable to
get an access once the washing cycle has started
due to safety reasons.
Quick Test Mode
Definition of Quick Test Mode:
- Check operation of all LED’s (Verify faulty LED).
- Check model and software version.
- Check different operating modes (e.g. water valve, motor, door, drain pump, etc.).
How to Enter:
- Plug in the unit.
- Press rinse key, soak key and Power Key at the same Time.
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
WARNING
F100_Technical Manual-03435A_EN_140321.indd 3 2014-03-21 �� 5:08:40