Samsung LNS4696DX-XAA - Manual (Page 52)

English-50
Changing the Channel of the Sub (PIP) Picture
After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels.
1 Press the MENU button. Press the or button to select “PIP”,
then press the ENTER button.
2 Press the or button to select “Channel”, then press the
ENTER button.
Alternate method
Press the CH or CH button under the cover of the remote control to change
the sub picture channels while PIP is on.
3 Press the or button to select a channel you want, then press the
ENTER button.
Select “Return” by pressing the or button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
• Air : “Air” antenna signal
Cable : “Cable” antenna signal
Selecting a Signal Source (Air or Cable) for PIP
If the PIP source is TV while PIP is On, you can select a different broadcasting source for the PIP picture from the main picture.
1 Press the MENU button. Press the or button to select “PIP”,
then press the ENTER button.
2 Press the or button to select “Air/CATV”, then press the
ENTER button.
3 Press the or button to select “Air” or “Cable”, then press the
ENTER button.
Select “Return” by pressing the or button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
• Air : “Air” antenna signal
Cable : “Cable” antenna signal
BN68-01047F-00Eng.qxd 7/14/06 5:18 AM Page 50