Samsung LNS4696DX-XAA - Manual (Page 34)

English-32
Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the
TV source (broadcast or cable).
Viewing an External Signal Source
1 Press the MENU button.
Press the ENTER button to select “Input”.
2 Press the or button to select “Source List”, then press the
ENTER button.
Press the or button to select a signal source, then press the
ENTER button.
• When you connect equipment to the TV, you can choose between the
following sets of jacks: “AV1”, “S-Video”, “Component1”, “Component2”,
“PC”, “HDMI1”, or “HDMI2” on the TV’s rear panel, and "AV2" on the
TV's side panel.
Alternate method
Setting the Signal Source
Press the SOURCE button on the remote control
repeatedly to select an external signal source.
Only connected devices can be selected.
Before selecting an input source, make sure the corresponding external device is connected first.
HDMI input can be selected only when the external device is turned on and connected to the TV.
BN68-01047F-00Eng.qxd 7/14/06 5:16 AM Page 32