Samsung LS27D590PS-ZA - Manual (Page 72)

72
Setup and Reset
6
6 Setup and Reset
6.6 Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
6.6.1 Configuring Power LED On
1
When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2
Move to Settings controlling the JOG button UP/DOWN and press the JOG button.
3
Move to Power LED On controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.

Working : The power LED is on when the product is turned on.

Stand-by : The power LED is on when the product is turned off.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
Working
Stand-by
Off
Auto
Eco Saving
PC/AV Mode
Source Detection
Key Repeat Time
Off Timer
Power LED On
Reset All
Settings
Set the status of the
power LED.