Samsung UN46C9000ZFXZA - Manual (Page 8)

8
Touch Control
How to connect using the Samsung Wireless LAN Adapter
1 Connect the Samsung Wireless LAN Adapter to the TV.
• To connect using Samsung Auto Confi guration, turn off
any other devices nearby that support auto confi guration
fi rst.
2 Keep within 8 inches (20cm) between Touch Control and
Samsung Wireless LAN Adapter.
3 On the Screen, tap .
• It may take about one minute to establish a wireless
connection between the TV and Touch Control using the
Samsung Wireless LAN Adapter.
4 If the network is connected, tap . The
screen appears.
• If the connection fails, choose one of the other connection
methods: PBC(WPS), auto confi guration, or manual
confi guration.
5 On the screen, select the TV you want to
connect.
• If the TV you want to connect cannot be found on the list,
tap to retry.
6 When done, tap .
Network
Select a network.
PBC(WPS)
Auto Confi guration
Unsecured
Unsecured
Secured
Secured
Connect TV
Allow
New remote
Touch Control(00-12-FB-D2-F2-39) has
been detected. Choose whether to use
the remote control.
Deny
[BN68-03092A]Touch control-01L03.indb 8 2010-05-27 오후 3:50:09