Samsung UN46C9000ZFXZA - Manual (Page 18)

18
Touch Control
7 Change the code set by tapping or and then
select .
If the external device turns on or off, select to
register the external device.
8 If you can’t find codeset on the list, tap to
start the remote’s external device registration process.
• Tap for learning guide or tap to start
learning.
9 You must now assign the control buttons on the
device’s remote to corresponding buttons on the LCD
remote. To begin, tap a button on the LCD remote’s
screen to which you want to assign a button from the
device’s remote.
• The selected button blinks.
10 Press the corresponding button on the device’s remote.
• When the button LCD remote’s stops blinking, the
assignment is complete. Assign the other buttons in the
same way.
• To register the Channel, Volume and Mute buttons on
an external device, tap at the top of the
Touch Control.
11 Select to complete the registration.
Send IR
Apply
Send IR to device
POWER
Detail
Codeset
VOL/CH
Navigation
Learn OK
Navigation
Select a button, and enter the
device remote control button
you wish to learn within 10
seconds. Press OK to fi nish
learning.
Help OK
[BN68-03092A]Touch control-01L03.indb 18 2010-05-27 오후 3:50:14