Samsung UN46C9000ZFXZA - Manual (Page 5)

5
Touch Control
First Time User Setup
The default setup screen appears when your Touch Control is turned on for the first
time. To connect the Touch Control to the TV, you must complete the following steps.
1 Select the desired language, and then tap .
2 Select to connect the Touch Control. If you want
to connect to it later or if you have changed the Touch
Control to a new one, select . If you selected
, refer to “Setting up the Network” (p. 6) when you
want to connect the TV and Touch Control.
• The Samsung Wireless LAN Adapter must be connected
to the TV before you establish a connection.
• The Samsung Wireless LAN Adapter and Touch Control
must be parallel and no farther than 8 inches (20cm)
apart.
• If you are failed, reconnect the Samsung Wireless LAN
Adapter, and then try again.
• For initial TV settings, refer to the TV manual.
Select a Language.
Language
English
OK
Welcome
Select Language of the OSD.
Menu Language : English
Enter
Plug & Play
Succeed!
Complete the confi guration of
this remote control.
Do the TV confi guration
following the TV screen
information.
OK
Connect TV
Keyboard
TV Control Services
[BN68-03092A]Touch control-01L03.indb 5 2010-05-27 오후 3:50:08