Samsung SPH-A600ZSSXAR - Manual (Page 23)

Section 2: Understanding Your PCS Phone
2A: Your PCS Phone - The Basics
15
Using the Battery
Battery Capacity
Your PCS Phone is equipped with a Lithium Ion (LiIon) battery.
It allows you to recharge your battery before it is fully drained.
The battery provides approximately 3 hours of continuous
digital talk time (1.5 hours in analog) or approximately 240
hours of continuous digital standby time (17 hours in analog).
When the battery reaches 5 % of its capacity, the battery icon
blinks. When there are approximately two minutes of talk time
left, the phone sounds an audible alert and then powers down.
Note: Long backlight settings, searching for service, vibrate mode, and
browser use affect the battery’s talk and standby times.
Tip: Be sure to watch your phone’s battery level indicator and charge the
battery before it runs out of power.
Installing the Battery
Your PCS Phone comes with a LiIon battery. Follow these steps
to install it:
1. Insert the battery into the opening on the back of the
phone, making sure the plastic tab on the back is inserted
into the matching slot in the phone.
2. Press up until the latch snaps into place.