Samsung SGH-X507HBACIN - Manual (Page 138)

134
Section 10
ⅷ DNS
ⅷ
DNS1: enter the primary DNS (Domain Name System)
address.
ⅷ DNS2: enter the secondary DNS address.
ⅷ
Bearer: select the bearer to be used for each type of network
address accessed: GPRS or GSM. The remaining options
depend on the Bearer setting.
When the bearer is set to GPRS:
ⅷ APN: enter the access point name used for the address of the
GPRS network gateway.
ⅷ Login ID: enter the User ID required to connect to the GPRS
network.
ⅷ
Password: enter the password required to connect to the GPRS
network.
When the bearer is set to GSM:
ⅷ Dial Number: enter the PPP server phone number
ⅷ Login ID: enter the PPP server login ID.
ⅷ
Password: enter the PPP server password.
ⅷ Data Call Type: select a data call type: Analog or ISDN.
Note: The WAP settings may vary depending on the service provider.