Samsung HMX-F80BN-XAA - Manual (Page 63)

59
Advanced recording
Adjusting the focus manually
This camcorder automatically focuses subjects from close-up to
infinity. However, the correct focus may not be obtained depending
on the recording conditions. If this occurs, use the manual focus
mode.
1
Press the [Control (Up/Down)]
button to select Manual.
The manual focus adjustment
indicator appears.
2
Press the [Control (Left/Right)]
button to select the desired
indicator to adjust focus, and then press the [Control (OK)]
button.
The camcorder applies the manual focus setting and the ( )
indicator appears.
Focusing on a nearer or farther subject
To focus on a nearer subject, press the [Control (Left)] button.
To focus on a further subject, press the [Control (Right)] button.
The nearer or further icon ( / ) appears between the
indicators when focus adjustment reaches the end.
The adjusted value is applied right after you press the [Control
(Left/Right)] button to adjust the focus.
•
•
•
•
Examples of when to use the Manual focus mode
When the subject is dark.
When the background is too bright.
When you view the subject through a window that is stained or
wet.
When the subject has dense horizontal or sloping stripes.
When the subject is distant and behind a nearby wire fence.
When you are shooting walls, the sky, or other low-contrast
subjects.
When the subject is emitting or reflecting strong light.
When you are focusing on a subject near the boundary of the
frame. •
•
•
•
•
•
•
•
You can also adjust the focus with the shortcut menu. ¬page 27
Manual focusing focuses on a point in the framed scene while auto
focusing focuses on the center area automatically.
The Auto Focus (AF) setting is useful when you operate the zoom
function because you might not be able to keep accurate focus after
the zoom ratio has been changed.
When Zoom Type is set to Digital Zoom, manual focusing will not
focus accurately. Before focusing manually, check if the Digital
Zoom is turned off.
¬page 62
•
•
•
•
[220Min] STBY
9999
Manual