Samsung EC-ST100ZBPBPA - Manual (Page 91)

Playback/Editing 90
Transferring files to your Windows computer
Turn on the camera.
5
The computer recognizes the camera automatically. •
If you set the USB option to Select Mode, select Computer from the
pop-up window.
Select a destination folder on your computer.
6
If your camera has no new files, the pop-up window for saving •
new files will not appear.
Select
7
Yes.
New files will be transferred to the computer. •
For Windows Vista and Windows 7, select Run iStudio.exe from the
AutoPlay window to start Intelli-studio.
Transferring files using Intelli-studio
Intelli-studio will start automatically when you connect the camera
to your computer with the USB cable.
The battery will charge while the camera is connected to a computer with the
USB cable.
In Shooting or Playback mode, select
1
M
Select
2
. (repeatedly)
Turn off the camera.
3
Connect the camera to your computer with the USB
4
cable.
You must plug the end of the cable with the indicator light ( S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.