Samsung EC-ST100ZBPBPA - Manual (Page 50)

Shooting options 49
Using the timer
Pose for your photo while the AF-assist light/timer lamp
5
is blinking.
The AF-assist light/timer lamp will stop blinking just before the •
camera automatically takes a photo.
The motion timer may not work when:
You are more than 10 ft (3 m) away from the camera. •
Your movements are too subtle. •
There is too much light or backlight. •
The subject is close enough to reflect the AF light. •
Using the motion timer
In Shooting mode, select
1
“ .
Press [
2
Shutter].
Stand within 10 ft (3 m) of the camera within 6 seconds
3
after pressing [Shutter].
Make a motion, such as waving your arms, to activate
4
the timer.
The AF-assist light/timer lamp will start to blink rapidly when •
the camera detects you.
The detection range of
the motion timer