Samsung LNR408DX-XAC - Manual (Page 6)

Plug & Play
When the TV is initially powered on, two basic customer settings proceed
automatically and subsequently: Setting Auto program, Clock.
1
Press the POWER button on the remote
control.
The message “Menu language, Channels and
Time will be set.” is displayed. Press the
ENTER
button, then “Select the language
of the OSD” menu is automatically displayed.
2
Press the ENTER button to enter the
language.
Press the UP/DOWN buttons to select
language, then the ENTER button.
“Select the antennas to memorize.” menu is
automatically displayed.
3
Press the UP/DOWN buttons to
memorize the channels of the selected
connection. Press the ENTER button to
select “Start”.
4
Press the UP/DOWN buttons to select
“Digital Channel”, then press the ENTER
button.
Press the UP/DOWN buttons to select
“STD”, “HRC” or “IRC”, press the ENTER
button.
Press the UP/DOWN buttons to select
“Analog Channel”, then press the ENTER
button. Press the UP/DOWN buttons to
select “STD”, “HRC” or “IRC”, press the
ENTER button.
Press the UP/DOWN buttons to select
“Start”, then press the ENTER button to
memorize the channels.
BN68-00515U-X0Eng.qxd 1/5/05 10:00 PM Page 6