Samsung EC-S85ZZBBA-SP - Manual (Page 83)

82 _PLAY
Playback ( ø ) PictBridge
å When this menu is selected without inserting a memory card, the [No
Card] message will be displayed.
å If there is not enough space available in the memory card to copy
saved images in the internal memory (About 19 MB), the [Copy To
Card] command will copy only some of the images and display [Memory
Full!] message. Then the system will return to the playback mode.
Please be sure to delete any unnecessary files to free up space before
inserting the memory card into the camera.
å When you move the images that are stored in the internal memory by
doing [Copy To Card] to the card, the next number of file names will be
created in the card to avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file
names start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file
names start from after the last captured file name. After completing
[Copy To Card], the last stored image of the last copied folder is
displayed on the LCD monitor.
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images directly.
Movie clips and voice files cannot be printed.
Ê Connecting the Camera to a Printer
Ê Setting up the camera for connection to
the printer
1. Connect the camera and printer with USB
cable.
2. Select the [Printer] menu by pressing Up /
Down button and press the OK button.
Select USB
Computer
Printer
Confirm OK