Samsung EC-S85ZZBBA-SP - Manual (Page 30)

02 RECORDING
29 RECORDING_
Ê The Motion Timer fl ows are as followings. (Night mode or Fireworks
mode excluded)
Selecting the Motion Timer à Pressing the Shutter button à Confi rm-
ing the composition (Within 6 sec.)
*1 Ã Starting the detection (Swing
your hands fully) *2 Ã Stopping the detection (Do not move) Ã Taking
an image (after 2 sec.)
*1: The camera detects the subject's movement 6 seconds after pressing the Shtter but-
ton, so confi rm the composition within 6 seconds.
*2: Move your body or hands fully.
Ê Selecting the self-timer
1. Rotate the Mode dial to select a RECORD-
ING mode with the exception of VOICE
RECORDING mode.
2. Press the SELF-TIMER ( ✢ ) button until the
desired mode indicator displays on the LCD
monitor. A 10 second, 2 second, Double self-
timer or Motion timer icon appears on the LCD
monitor.
3. When you press the SHUTTER button, the
picture will be taken after the specifi ed time
has elapsed.
Self-timer ( ✢ ) / Right button
In the following cases, the Motion Timer may not operate.
å The focus distance is over 3m.
å The exposure is too bright or dark
å In backlight conditions.
å The movement is insignifi cant
å The movement is detected out of the
center part (50%) of the sensor where
the movement is recognized.
[Selecting the 10 SEC
self-timer]
Ê Self-timer mode indecator
Icon Mode Description
✢
10SEC
self-timer
Pressing the shutter button will allow an interval
of 10 seconds before the image is taken.
✡ 2SEC
self-timer
Pressing the shutter button will allow an interval
of 2 seconds before the image is taken.
✣ Double
self-timer
A picture will be taken after about 10 seconds
and 2 seconds later a second picture will be
taken. When using the fl ash, the 2-second self-
timer may be delayed for longer than 2 seconds
depending on the fl ash charging time.
]
Motion
Timer
The camera detects the subject's movement 6
seconds after pressing the Shutter button, and the
picture is taken when the movement is stopped.
Ê Motion Timer
Motion Icon & Self-timer lamp
Pressing the Shuter button after
setting the Motion Timer
Blink (0.5 second interval)
Detecting the subject's movement Blink (0.25 second interval)
No movement is detected
Turn on and the image is taken after
2 seconds
The detection range
of Motion Timer