Samsung MJ15ASKB-DZS User Manual
Page 16
1.
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2-1.
Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
2-2.
Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the D-SUB connection cable.
2-3.
In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor.
3.
Turn on your computer and monitor. If your monitor displays an image, installation is complete.
SyncMaster 510N / 710N / 910N / 512N / 712N / 912N / 913N / 515V / 915V
This manual is related to the following products:
- MJ17BSABV MJ17ASSS MJ19ASSS-XBM MJ15ASSS-XBM MJ15ASKS-MAG MJ15ASKS-DZS MJ17BSASV-XBG MJ15ASSN-XAZ MJ15ASSS-XBG MJ19BSASQ-XBG MJ17BSTSQ-EDC MJ15ASKB-MAG MJ17ASSBY MJ19ASSS MJ15ASHS-XAZ MJ15ASSS-XAX MJ19ASSS-PES MJ19ASSS-CLT MJ19ASSB MJ19BSASQ MJ19ASKBJ MJ19ASSS-CLC MJ19BSABV LS15MJANS-XAZ MJ17BSASQ-XBG MJ15ASSB MJ15ASKBY MJ15ASKB LS15MJAKB-XAX MJ19DSTBV MJ19BSASQ-XAZ MJ15ASKBJ MJ17ASKB