Samsung NP915S3G-K04US - Manual (Page 77)

76 77
Chapter 3.
Using the computer
Initializing the TPM chip
When you use the TPM function for the first time or you want to
register the user again, you have to initialize the TPM chip.
Initializing the TPM chip erases all authentication •
information saved on the TPM chip. Any decision to
initialize must be taken carefully.
To initialize the TPM chip again while the TPM function is
•
in use, you have to decrypt any existing files and folders
encrypted by the TPM function first. Otherwise, you
will not be able to access the files and folders after re-
initialization.
1
Restart the computer.
When the Samsung logo screen appears, press the F2 key
repeatedly.
2
If the BIOS screen appears, select the Security > TPM
Configuration item and press Enter.
TPM Device
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
Disabled
Enabled
Enabled
3
Set the TPM Device item to Enabled and set the Change
TPM Status to Clear.
TPM Device
TPM State
Security Chip State
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
Enabled
No Change
Clear
Enabled & Activate
Deactivate & Disable
Clear
4
Press the F10 key to save the changes.
Using the TPM Security Device
(Optional)