Samsung SC-D103-XAC - Manual (Page 87)

ENGLISH
83 83
Digital Still Camera mode
Inserting and ejecting the Memory Card
● Inserting the Memory Card
1. Turn the Power switch to OFF.
2. Insert the Memory Card in the direction of the arrow into the Memory Card slot
located on the bottom of the camcorder.
● Ejecting the Memory Card
1. Turn the Power switch to OFF.
2. Push the Memory Card, then it comes out of the camcorder automatically.
3. Pull out the Memory Card.
✤ Do not attempt to pull the Memory Card out without first pushing it in.
Notes
■ Memory Stick Duo type or RS-MMC (SC-D105 MODEL only) should be inserted by using
the ADAPTOR (not supplied).
■ If you set the camcorder to M.PLAY mode, the last recorded still image appears.
-
If there are no recorded images on the Memory Card, NO STORED PHOTO!
or NO STORED MPEG4! and
will display on the screen.
■ While recording, loading, erasing or formatting, do not turn off the power or change the mode.
■ Please turn the power off before you insert or eject the Memory Card.
You could lose data on the Memory Card.
■ Do not allow metal substances to come in contact with the terminals of the Memory Card.
■ Do not bend, drop or apply strong shock to Memory Card.
■ After pulling the Memory Card out from the camcorder, please keep the Memory Card in a soft case to prevent static shock.
■ The stored contents may be changed or lost as a result of misuse, static electricity, electric noise or repair.
Save important images separately.
■ Samsung is not responsible for data loss due to misuse.
(Usable MEMORY CARD)
SCD103
Memory Stick
SCD105
Memory Stick
Memory Stick PRO
SD/MMC
00743R SCD103 SEA (60~107) 1/10/04 8:56 AM Page 83