Samsung SC-D103-XAC - Manual (Page 70)

ENGLISH
66 66
Advanced Recording
✤ The NITE PIX function works in CAMERA/M.REC mode.
✤ The NITE PIX function enables you to record a subject in darkness.
1. Set the camcorder to CAMERA mode.
2. Slide the NITE PIX switch to ON.
■ (NITE PIX indicator) appears on the LCD monitor.
■ The infrared(invisible rays) light is turned on automatically.
3. To cancel the NITE PIX function, slide the NITE PIX switch to OFF.
Notes
■ The maximum recording distance using the infrared light is about 3 m (about 10 feet).
■ If you use the NITE PIX function in normal recording situations (ex. outdoors by day),
the recorded picture may be tinted green.
■ In the NITE PIX mode, certain functions are not available, such as White Balance, Program AE, DSE, BLC.
■ If focusing is difficult with the auto focus mode when using the NITE PIX function, focus manually.
■ Do not cover the Infrared Light with the hand.
NITE PIX (0 lux recording)
NITE PIX
0 : 0 0 : 0 0
6 0 min
STBY
ON
OFF
NITE PIX POWER
00743R SCD103 SEA (60~107) 1/10/04 8:56 AM Page 66