Asus MYPAL A636 - Manual (Page 109)

8-8 Chapter 8
Infrared (IR) connection
Setting beam options
To set the beam options:
1. Tap > Settings > Connections tab.
2. Tap Beam icon to display the Settings
screen.
3. By default, your device detects incoming
infrared (IR) beams and prompts you to
accept them. If you do not want your
device to detect or receive beans, clear
the Receive all incoming beams check
box on the Settings screen.
Receiving infrared beams
To receive a file via infrared beam:
1. When another infrared device within
range beams file or data to you, your
device receives the file or data and
prompts a receiving data status.
NOTE Make sure to align the IR ports so that they are unobstructed
and within the required range. Received files are automatically
saved in the My Documents folder.
2. After data transmission, tap Yes to accept
or No to reject.