Samsung PS63B680T6W - Manual (Page 22)

English - 22
Function Description
Setting the Time
Clock
❑
Setting the clock is necessary in order to use the various timer features of the TV.
The current time will appear every time you press the N INFO button.
If you disconnect the power cord, you have to set the clock again. N
Clock Mode „
You can set up the current time manually or automatically.
Auto • : Set the current time automatically using the time from the digital broadcast.
Manual • : Set the current time to a manually specified time.
Clock Set
„
You can set the current time manually.
Set up this item when you have set N Clock Mode to Manual.
You can set the N Day, Month, Year, Hour, Minute directly by pressing the number
buttons on the remote control.
Sleep Timer → Off / 30 min / 60 min / 90 min / 120 min / 150 min
❑
/ 180 min
The sleep timer automatically shuts off the TV after a preset time.
(30, 60, 90, 120, 150 and 180 minutes).
The TV automatically switches to standby mode when the timer reaches 0. N
To cancel the N Sleep Timer function, select Off.
Press the T TOOLS button to display Tools menu.
You can also set the sleep timer by selecting Tools → Sleep Timer.
Timer 1 / Timer 2 / Timer 3
❑
You can set the TV to turn on or off at a desired time.
On Time • : Sets the time for the TV to turn on.
Off Time • : Sets the time for the TV to turn off.
Volume • : Set the required volume level.
Source • : Selects TV or USB device.
When you select the N TV, you can set the Antenna and Channel.
Antenna - : Selects Air or Cable.
Channel - : Select the desired channel.
When you select the N USB, you can set the Contents.
Contents - : Selects the desired contents on the USB.
If the folder containing a music file is not selected or there is no music file on the USB, Timer function does not operate correctly. N
Repeat • : Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
When N Manual is selected, press the ► button to select the desired day of the week. Press the ENTERE button over the
desired day and the c mark will appear.
The whole folder on the USB are supports English 64 character. N
You must set the clock first. N
You can set the hour, minute and programme by pressing the number buttons on the remote control. N
Auto Power Off N
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on
by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long
time.
Time
Clock : -- : -- ►
Sleep Timer : Off
Timer 1 : Inactivated
Timer 2 : Inactivated
Timer 3 : Inactivated
U Move E Enter R Return
Setup
Plug & Play
Menu Language
: English
Time ►
Broadcast
Security
Network
General
BN68-02333K-Eng.indb 22 2009-10-21 �� 9:00:39