Samsung PS63B680T6W - Manual (Page 15)

English - 15
Changing the Picture Settings
Mode
❑
You can select the type of picture which best corresponds to your viewing requirements.
Dynamic / Standard / Eco / Movie
„
Press the T TOOLS button to display Tools menu.
You can also set the picture mode by selecting Tools → Picture Mode.
Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
❑
Your television has several setting options that allow you to control the picture quality.
Cell Light • : Adjusts the pixel brightness.
Contrast • : Adjusts the contrast level.
Brightness • : Adjusts the brightness level.
Sharpness • : Adjusts the sharpness.
Colour • : Adjusts the colour saturation of the picture using the bar on the screen.
Tint (G/R) • : Adjusts the colour tint of the picture.
When you make changes to N Cell Light, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
accordingly.
The adjusted values are saved for each picture mode. N
In Analogue N TV, Ext., AV modes of the PAL system, you cannot use the Tint Function.
In N PC mode, you can only make changes to Cell Light, Contrast and Brightness.
Each adjusted setting will be stored separately according to its input mode. N
The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and then this N
will reduce the overall running cost.
Advanced Settings
❑
You can adjust the advanced settings for your screen including the colour and contrast.
Advanced Settings N is available in Standard or Movie mode.
In N PC mode, you can only make changes to Dynamic Contrast, Gamma and
White Balance from among the Advanced Settings items.
Black Tone → „ Off / Dark / Darker / Darkest
You can enhance the picture depth by adjusting the black colour density.
Dynamic Contrast →
„
Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
„
You can adjust the primary colour (Red, Green, Blue) Intensity.
Colour Space
„
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the
most natural colour.
Auto • : Automatically sets the colour range depending on the input video source.
Native • : Sets the colour range wider than the that of the input video source.
Custom • : Adjusts the colour range to suit your preference.
Customizing the Colour Space N
- Adjusts the Colour range to suit your preference. Colour is available when Colour Space is set to Custom.
- Colour → Red / Green / Blue / Yellow / Cyan / Magenta
- Red / Green / Blue: You can adjust the RGB values for the selected colour.
- Reset: Resets the colour space to the default values.
Picture Control
Continued...
Mode : Standard ►
Cell Light : 4
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Advanced Settings
Picture
Colour : 50
Tint (G/R) : G50/R50
Advanced Settings ►
Picture Options
Picture Reset
Picture
BN68-02333K-Eng.indb 15 2009-10-21 �� 9:00:37