Allied Telesis NETEXTREME II AT-2973SX - Manual (Page 51)

AT-2973SX, AT-2973T, and AT-2973T/4 NetExtreme II Family Adapters Installation and User’s Guide
51
4. Mount the base image to a local directory so that you can add or
remove packages by entering:
imagex /mountrw c:\VistaPEx86\winpe.wim 1
c:\VistaPEx86\mount
5. Place the monolithic driver and inf file in c:\drivers\x32\ by entering:
peimg /inf=c:\Drivers\x32\b06nd.inf
c:\VistaPEx86\mount\windows
AIK inserts the driver into the WinPE 2.0 image.
6. To complete the customization of the image, prepare the image for
deployment, enter:
peimg /prep c:\VistaPEx86\mount\windows
7. When asked to continue and have the program prepare the image for
deployment, enter:
yes
8. To commit the changes to the original image file (Winpe.wim), enter:
imagex /unmount c:\VistaPEx86\mount /commit
9. To replace the default Boot.wim file in the \ISO directory with your new
custom image, enter:
copy c:\VistaPex86\winpe.wim
c:\VistaPEx86\ISO\sources\boot.wim