2 setting editor | status, Setting editor | status – Campbell Scientific TX320 Transmitter User Manual
Page 49
TX320 Transmitter
Also check the GPS antenna placement. Poor GPS antenna placement will
increase the number of missed transmissions, or possibly stop all transmission
(see Section 7.4, GPS Antenna, for more information).
FIGURE 8-2. Settings Editor | GPS in Device Configuration Utility
8.4.2 Setting Editor | Status
The Status tab provides a lot of useful information about the transmitter that
can help in troubleshooting (see FIGURE 8-1). Specifically, ensure that the
fail-safe status is OK. Also the supply voltage amount needs to be greater than
10.8 V. Replace the battery if the supply voltage amount is too low.
39