beautypg.com

Campbell Scientific RDP500 Remote Data Platform User Manual

Page 12

background image

RDP500 Remote Data Platform

5. Using the small 7/16” wrench provided, tighten the two bolts to firmly

attach the enclosure to the base. The two bolts are easily accessed through
the slots on either side of the enclosure bracket (Figure 3.2-3 and 3.2-4).

Slight variability may exist among Fischer/Porter and Belfort
rain gauge bases. If the internal enclosure cannot be mounted so
that the rain gauge’s outer housing will not slide on, please
contact Campbell Scientific, Inc.

NOTE

Thin Head Wrench

FIGURE 3.2-3. Tightening bolts to attach enclosure to the base.

8