Campbell Scientific NL115 Ethernet Interface and CompactFlash Module - Manual (Page 14)

NL115 Ethernet and CompactFlash ® Module
EMI and ESD Protection: Meets requirements for a class A device
under European Standards
Application of Council Directive(s):
89/336/EEC as amended by 89/336/EEC
and 93/68/EEC
Standards to which conformity is declared:
EN55022-1; 1995 and EN50082-1: 1992
Cable Requirements: Use a straight-through Ethernet cable
when the cable is run from the hub to the
NL115. Use a crossover Ethernet cable
when the cable is run directly from the
computer to the NL115. Use a shielded
cable and/or the 28033 surge suppressor
when the cable length is more than 9 ft.
Typical Access Speed: 200 to 400 kbits s –1
Memory Configuration: User-selectable for either ring style
(default) or fill-and-stop.
Software Requirements: LoggerNet 3.2 or later
PC400 1.3 or later
Dimensions: 10.2 x 8.9 x 6.4 cm (4.0 x 3.5 x 2.5 in)
Weight: 154 g (5.4 oz)
FIGURE 6-1. NL115 Ethernet/CompactFlash Module
8