Campbell Scientific NL100 Network Link Interface - Manual (Page 28)

NL100/105 Network Link Interface
In the LoggerNet communications software, the phone modem on the
NL100/105 side should be shown attached to the IPPort. The datalogger is then
shown as connected to the remote phone modem. Refer to Figure 6 below.
FIGURE 6. LoggerNet Setup for NL100/105 to Phone to Datalogger Connection
3.3 NL100/105 to Datalogger Connections - CR9000/CR5000
3.3.1 Software Setup
As an alternative to LoggerNet, PC9000 software (version 3.5 or higher) can
be used to communicate with the CR9000 and CR5000 dataloggers via the
NL100/105 and a TCP/IP Network. To configure the software for
communication, choose the Tools | CommLink menu option. From the I/O Port
drop-down list box, select NET. On the bottom left side of the screen, there are
fields in which to type the TCP/IP address and the port number. The setup
should look similar to Figure 7, below.
24