Campbell Scientific EasyAG Probe for Soil Volumetric Water Content Profiles - Manual (Page 12)

EasyAG ® Soil Water Content Profile Probes
‘Load Measurement Failure Errors
If ES1_SF(1) = NAN Then ES1_SF(1) = -99999 ‘If probe fails (NAN at first sensor)
For X = 1 to 8 step 1 ‘Load -99999 to all sensors
If ES1_SF(1) < -9999 Then
ES1_SF(X) = -99999
ES1_WC(X) = -99999
ES1_VIC(X) = -99999
Else ‘...OR...
If ES1_SF(X) < -999 Then ‘If a WC sensor fails (indicated by -1000)
ES1_WC(X) = -99999 ‘Load NAN for water content
Else ‘...OR...
ES1_WC(X) = ((ES1_SF(X) - c)/a)^(1/b) ‘apply calibration
EndIf
EndIf
Next X
‘Measure rain
PulseCount (Rain_mm,1,2,2,0,.01,0)
‘Input irrigation events manually in Irrimax, 0 must be written to data file
Irrig_mm = 0
‘Output Data to Storage
CallTable ES1_SF ‘Store Scaled Frequency and VIC Data with Rain and Irrigation
‘for Irrimax Software
CallTable ES1_WC ‘Store Water Content Data
‘Next
Scan
Next Scan
‘End Program
EndProg
8