Samlex America ST1500-148 - Manual (Page 24)

23
3-5. Rear Panel Operation
Rear view
ST-1000/ST-1500
ST-2000/ST-2500
3-5-1. Fan Ventilation:
Be sure to keep it a distance (at least 1 inch) form surrounding things.
3-6. Installation
The power inverter should be installed in a location that meets the following
requirements:
3-6-1. Dry – Do not allow water to drip or splash on the inverter.
3-6-2. Cool – Ambient air temperature should be between 0℃ and 40℃,
the cooler the better.
3-6-3. Safety – Do not install batteries in compartment or other areas
where flammable fumes existence such as fuel storage areas or
engine compartments.
3-6-4. Ventilated – Allow at least one inch of clearance around the
Inverter for air flow. Ensure the ventilation shafts on the rear
and bottom of the unit are not obstructed.