Availability – Allied Telesis 86241-06 User Manual
Page 30
30
Patch Release Note
Patch 86241-05 for Software Release 2.4.1
C613-10340-00 REV E
Figure 1-7: Example output from the SHOW SWITCH PORT command showing the RELEARN parameter.
Availability
Patches can be downloaded from the Software Updates area of the Allied
Telesyn web site at
. A
licence or password is not required to use a patch.
Switch Port Information
---------------------------------------------------------------------------
Port .......................... 1
Description ................... To intranet hub, port 4
Status ........................ ENABLED
Link State .................... Up
UpTime ........................ 00:10:49
Port Media Type ............... ISO8802-3 CSMACD
Configured speed/duplex ....... Autonegotiate
Actual speed/duplex ........... 1000 Mbps, full duplex
Configured master/slave mode .. Autonegotiate
Actual master/slave mode ...... Master
Acceptable Frame Types ........ Admit All Frames
Broadcast rate limit .......... 1000/s
Multicast rate limit .......... -
DLF rate limit ................ -
Learn limit ................... -
Relearn ....................... OFF
Intrusion action .............. Discard
Current learned, lock state ... 15, not locked
Mirroring ..................... Tx, to port 22
Is this port mirror port ...... No
Enabled flow control .......... Pause
Send tagged pkts for VLAN(s) .. marketing (87)
sales (321)
Port-based VLAN ............... accounting (42)
Ingress Filtering ............. OFF
Trunk Group ................... -
STP ........................... company
Multicast filtering mode ...... (B) Forward all unregister groups
---------------------------------------------------------------------------
Table 1-1: New parameter in the output of the SHOW SWITCH PORT
command.
Parameter
Meaning
Relearn
Whether
or not
MAC address learning is used, one of “ON or
OFF”.