LBL Lighting Chicago Jazz S - Manual (Page 3)

3
4B
4
SCREW ALLEN
WRENCH
Properly place the wires and the wire nut connections
into the canopy.
Remount the canopy to the mounting plate and secure
it by reinstalling and tightening the four screws.
1
Adjust the Suspension Cables
Adjust the aircraft cables until the fixture is level; feed
the cable into the cable clutch to raise the fixture and
push in on the cable clutch nipple to release the cable
and lower the fixture.
CABLE
CLUTCH CABLE
CLUTCH
1
5A
5
Lift the socket assembly out of the fixture.
Unscrew and remove the old lamp.
Screw the new lamp into the socket.
Insert the socket assembly back into the fixture.
SOCKET
LAMP
6A
1
2
Replacing the Lamp
3
4
Use
Type A19 Medium Base Lamp. 120 volt MAX 75 Watt
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.